HXTAL - Hang Your Glass - Clear Gap Filling Glass Glue

For glass, metal, ceramics, plastic, stone, wood, ivoryAdhesive Requirements:Clear & Gap FillingSurface area 1/2” or greater for best resultsSet time 72 hours at room temp 72° or higher, cure time 7 daysSmall - 1ozLarge - 2ozEasy as 1,2,3…Instructions for use:1. Clean both the metal and the glass with 100% Acetone. This can bepurchased from your local hardware store. No substitutes such as Isopropyl or nail polish remover should be used for cleaning.2. Pour B into part A. Stir content with spatula included with a smooth swirl motion. Keep lid off and let sit in a dust free room for 2 hours to let tiny air bubble to travel to the top and dissipate. The longer it sets, the thicker it will become.3. Apply the epoxy to the desired area of glass (or other median) and place stand-off on glass. Tape the stand-off to guarantee the placement during the 72 hour set time (room temperature), expect longer if you are filling a gap.HXTAL cures in 7 days at room temperature.Notes: To speed up the set and/or cure time increase the temperature in the room. If you want to clean up excess adhesive use an Xacto knife (scalpel) after the epoxy has set. HXTAL does not expire but once mixed you can freeze and use one more time within 7 days. It will become thicker the second and final use, or the longer it sits.

Loctite Super Glue Glass Repair 0.07 oz. Liquid Clear Tube (each) 233841

Gorilla Glue Epoxy, Dries Clear, Gap Filling, Indoor & Outdoor, Water Resistant, 5 Minute Set, Dries Clear Transparent, 0.85oz/25mL, (Pack of 1) 4200602, Super Glue - Canada

HXTAL NYL-1 Epoxies Adhesives Surfacing, 43% OFF

Glues & Adhesives

How to Mix and use HXTAL NYL-1 to laminate glass

Glues & Adhesives

Adhesive Hang Your Glass

HXTAL NYL-1 Epoxy Adhesive 1.3 ounce kit

Adhesive Hang Your Glass

Glass glue: The best glue and how to use it

How to Mix and use HXTAL NYL-1 to laminate glass

Adhesive Hang Your Glass